Mount Genie The All-in Wonder Mount (1-Pack): The Easiest Wall Mount for Any Component Routers Modems Xbox Game Consoles DVRs | One Size Fits All | Home and Business (Black)

Awesome design and super easy to mount (less than 5 minutes). I needed a larger size and this fit perfectly around my large router. It has adjustable straps so it’s compatible with most routers, if not all. The straps make it easy to get to the router when needed and having all of the cord outlets accessible makes it very functional.

These are cheap, simple, and effective for hanging all kinds of boxes on the wall.

I dislike dangling cables. They just bug me -- aesthetically displeasing, easily snagged, and they kind of ruin the whole point of a wall-mounted TV. Who wants to see those cables? For our case, I used this wall mount to strap in an old school Nintendo Wii, which as it turns out does not require line-of-sight for ordinary controller functions (the sensor bar, which does require line of sight, wasn't a problem for us because we already have a wireless one). Perfect! I tried to install this the hard way -- mounting it behind an existing wall-mounted TV that I didn't want to take down just to deal with it. So, that was trickier than I expected, but I did eventually get it there with the help of a specialized wrench and some careful drilling of holes into the wall, ultimately ending with the plastic brackets quite securely attached to the wall studs. No chance they are coming down. Your wall will vary, so my advice from experience is just to make sure you know where you're going to mount the thing, work out where your cables will go, and think about what you need to do before you do it. Of course if you just take your TV off the wall in advance, that'll be much easier. I just pulled mine away from the wall as far as I could and used drill bits (without the drill) to gradually drill the holes I needed, then the aforementioned wrench to secure the screws. Once the mounting hardware was up, getting the console strapped in was a little bit tricky at first, but since it's velcro you can just keep strapping and wrapping until you get it right. That part is not too difficult; just make sure you hold the console securely in place until both strapped are securely attached! Once installed, easily forgotten. It's been completely reliable since (now more than a month).

The instructions could use a little help. I ended up botching up my wall following the instructions and should have just gone with my gut instead of reading them. Otherwise, it's a great product. I wish the straps were a little bit longer; the Xbox one fits in it, but I was concerned whether there would be enough strap to securely hold it in or not. It hasn't fallen yet, so I guess there is. Very simple install if you get it right the first time, and I definitely would buy it again. It holds the Xbox closely against the wall, and we have it hidden behind the TV.

Works perfect for what we were needing. Husband mounted to back of our tv and it has held up great without any give. Great size and quality.

First things first, when you get this mount get rid of the drywall anchors because they’re trash. Second, invest in an impact driver/cordless drill combo (if you plan on installing more things in the wall and in general). For the casual DIYer, I’d recommend Ryobi for the price and if you’re serious about building things then step up to Milwaukee (I personally buy Ryobi and Metabo HPT power tools as I don’t need to pay the premium of Milwaukee to do what I need to do around the house). Install is super easy as long as you either drive screws into either a stud or use proper drywall anchors. I’d recommend EZ Anchor drywall and stud anchors (rated for 50 lbs). Don’t use a screwdriver to drive in the drywall anchors as mentioned on the package. I’ve driven plenty of these drywall anchors using an impact driver with no issues. I personally hate Philips screws that come with the EZ Anchor kit or just in general. I opt for Spax star screws or GRK (you can buy these at the orange big box stores) with the proper impact driver bit. Star screws allow you to drive using an impact driver with no cam out/slippage/stripping of the screw head. Granted, if you have to remove the drywall anchor you’ll be left with a huge hole but as long as you know how to patch drywall, this is not an issue. Also invest in a two types of stud finders - one magnetic (I prefer Hansen) and another electronic type (I prefer Franklin). The magnetic one will find the drywall screws in the wall (you don’t want to drill into a screw head) and the electronic one will find the edges of the stud so you can center the screw hole when drilling into studs. For this mount, I have one end (of the “T”) into a stud with a 2 1/2 star screw and the other end using a drywall anchor with a 1 1/2 star screw so I know this mount is not going anywhere (I use this for an Xbox One) mounted behind a TV (mounted to the wall using a mount drilled into studs). I have the Xbox power supply and external HD using 3M strips. The controller mounts are drilled into the drywall with plastic anchors (no need for drywall/stud anchors) since controllers are lightweight).

Loved this product. Makes my room look tidy and neat not having the modem on the floor and the cables neat. I love it and a good product for the money.

Instructions are not horrible but could be a lot better. This item would benefit from a video showing just how to put it up. I am not an idiot but can be a little bit of a klutz sometimes. I eventually figured it out... I mounted this on a wooden wall so no need for the anchors -- the screws worked well. But, there is really no way that I could use all 4 screws. The slots for the straps are so shallow that it is pretty hard to get the straps in the slots once the plastic thingy is in place -- sort of like pushing a rope. I used the small straps. I cannot imagine mounting an item with the large/long straps. It would be gargantuan. So, the monster straps were scrap/waste for me. The end result was OK but the cost is a bit high for what you get -- especially considering you are going to probably throw away a couple of straps. But, I think it will work out for me although I would not buy it again.

Llevo un mes con el producto y se ve de buena calidad, lo use para colgar un router y tiene mucha versatilidad

Very easy to install. Good quality, perfect size for Xbox or PS consoles. Decently priced aswell.

Works perfectly as it should Also ideal because we changed from Xbox one to Xbox S and it fits all fine

This item comes with everything needed to install the holder on the wall. They even ship it with the heavy duty screw in drywall anchors which is a real bonus. As it turned out I was able to mount the digital box on the back of the TV. Great product and will certainly recommend.

Brilliant product. I've used it to hold up my very large gaming router by netgear as the model isn't wall mountable. But this product has made it be wall mounted! Will work great for a number of devices, like xbox, PlayStation, dvd players etc