PRESTO GUN BLUE TOUCH-UP PEN

Works very well make sure you prep by using an alcohol prep pad to clean the area first. Covered the scratches on the new sights I installed on my Marlin 30-30

I had my handgun milled for an optic. The company did terrible job blueing the area. The precision tip made touchups easy.

Had a bad scratch on an old pew pew. Cleaned with acetone. Applied with tip no pressing down. It’s not a paint pen! Excellent results. After waiting a few minutes wiped down and applied quality pew pew oil. Couldn’t see scratches anymore. Only apply to carbon steel. 10/10 recommendation.

I installed new sights myself on my LC9 that didn't fill the dovetail joint all the way. Had about .010 of the base of the joint on each side of the front sight still exposed and the coating was very light under the original sight. Probably due to the original sight being installed then uninstalled which is normal. Also on the front sight, before installing the new sight, I had to clean up the front and rear "sharp" edges of the joint ever so slightly before installing the new sight. About .005 on both front and rear. Against that black of the slide, that silver stood out like a sore thumb! There was no damage, just the coating was worn. I looked on YouTube for a solution and saw this pen. So I tried it and it worked perfect!!! I cleaned only the area missing the coating with a cue tip lightly moistened with some acetone (wife's finger nail polish remover lol, same thing) very well. Let dry for a minute or so then used the pen. I went over the silver lines about 5 times letting it dry for a minute or so before each application. I also used a "NEW" soft bristle brush I bought from Harbor Freight (about a buck) every couple coats to kind of blend it a little. It was about 99% perfect. I don't think anyone else would of really noticed but me, but when I took a cleaning patch with a dab of gun oil and wiped it down even I couldn't see it anymore. I took another patch (no oil this time) and wiped the area as to get as much oil off as possible and it was absolutely perfect!!! Nothing came off and I couldn't even tell where I did the touch up. I really tried my best with a couple more clean patches to wipe it off and it still looked great. I see that some reviewers didn't have the same experience as I did and I was on the fence about buying this, but I'm glad I did. The job came out so great except for those darn lines that really bugged the heck out of me. Anyhow, problem solved!

Worked well on a vintage scope. Cleaned and degreased it with alcohol prior and it looks good. Note: rubbing a graphite pencil ( I like to use a carpenter's flat pencil) with some gun oil will clean up some of the scratches and gunk fairly well. Just make sure all the oil is completely removed before applying the cold blue pen and follow the directions.

Got here quickly! Performs exactly as advertised! I let it dry, which happens rapidly, then rubbed the treated areas and it didn't rub off! I'm buying a half dozen more for all of my shooting bags!

I tried to use this a couple days ago and nothing but some clear fluid came out. Maybe it’s all user error and I just don’t know what I’m doing…but not likely. I pulled out the tip and turned it around to no effect. I shook it , tapped it on a flat surface and still nothing. I pulled the tip back out to see if any paint had soaked into the tip and there was nothing, no paint like I was expecting to see, just some clear fluid. I thought maybe the clear fluid somehow dries to firearm blue and put some on the rifle I was working on but it had no effect. When I tried to put the tip back in, it had become frayed and I couldn’t get it all the way in. I had been doing some much needed cleaning and maintenance on a number of my rifles for a few hours straight and was getting pretty tired. Out of frustration and not wanting to spend anymore energy on the pen, I just threw it away and said to hell with it. I will buy a different product and stay away from this product in the future.

When I first took it out the package, the felt tip of the pen was dry as a bone and bright colored; not the blackish blue color I expected. I thought it’d be the same color as a sharpie because the pen looks the same. However, after repeatedly tapping the felt tip against the problem areas of my gun, until a clear colored liquid came out in small amounts -several applications later, the silvery scratch marks on my Sig Sauer P365 due to falling on a pavement, are now virtually gone. Give this thing a chance!!! I kept attempting to return it thru Amazon and they made it hard as hell, so I decided to accept my loss of 14 dollars. At that point I kept toying with it and what do ya know..the sun of a gun works!

Works great on small worn spots on steel barrels and receivers. Wipe it on and watch it darken, great stuff to help keep your firearms in rust free condition longer.

Very useful pen. I scratched the barrel of my new handgun Browning Buckmark when I tried to remove it. I was very frustrated for my bad luck. So I read about the pen and its positive comments. And I decided to try. After reading the instructions I simply used the pen. Fantastic no scratch appears now. I highly recommend this gunsmith tool.

Wow, just wow! A product that works as advertised. My expectations were exceeded. I did a redneck gunsmith job with a dremmel and this stuff made it all look professional. I highly recommend.

Merci

excellent product