Lenox American Saw Lenox Tools 3084655X 5-1/2-Inch Drill Extension and 1/2-Inch Shank

Excelente extensión para trabajar en lugares de difícil acceso, 100% recomendable!

Good for this size, and temporarily holding a smaller size extension.

Lenox 5-1/2” extension (30846) The tool holding end has Allen screws, 5/32”, to secure a large arbor with. They recess when the tool is secure in the holder. It will hold a 7/16” drive end weather it’s a quick lock style or the same size as a 7/16” Allen wrench. If the tool is smaller than a 7/16” Allen then it will not center it with the shaft. There is some noticeable runout so it would be best for a rough hole or one that is already started and you need to drill deeper than a drill will get you. The tool holder is 15/16” O.D. 2” long and 1-3/32” deep. The shaft is 4-5/8” long and is a 6 side like a 7/16” Allen The drive end fits inside a 7/16” Quick lock Chuck and locks securely or 1/2”Jacobs Chuck or keyless chuck. Hope this helps with the vague product description provided and answers your questions.

Works well. Needed to feed a holesaw through a deep hole.

I got exactly what i expected to get. Can't ask for more.

Purchased extension rod for use with a Lenox 3 inch diameter self-feeding drill bit on a drill pressure. The extension rod was straight when taken out of the package. The drill bit without the extension rod worked great for several projects. I properly secured the extension rod to the drill bit and drill press. Got an intense wobble when powering the drill press and I quickly turned it off. The extension rod was bent within seconds of running drill press and still attached to the chuck. Had to use a chuck key to remove from drill press. waiting for a reply from Lenox

Thanks

Great service

tres content de mon outil

It worked well as expected. It is a good quality tool

The extension was strong enough but does not take a 1/2 inch shaft drill bit. I had to grind the bit to a 7/16 hex. it did work well enough then.

Worth it. 👍🏼👍🏼👍🏼

This is a solid extension BUT for only specific arbors as described. The wording "Drill Extension and 1/2" Shank" lead a buyer to think it will fit and extend boring bits. WRONG!!! The hex socket is smaller than 1/2" and won't fit larger Forstner boring bits. Lenox could have done better to remove 2mil from the socket to accommodate a greater range of bits.