16GB KIT (2x8GB) DDR4 3200MHz (PC4-3200AA) PC4-25600 UDIMM Desktop RAM – 288-Pin 1.2V CL22 Non-ECC Unbuffered DIMM Memory Module Upgrade

I did not have any problems, and they work great also it was a good price.

I purchased these because I needed jedec ram, my motherboard doesn't support exp profile memory so when I had purchased some gskill ripjaw ram for my pc it down clocked to 2666mhz, and cas latency went up, so because it was exp, that being said ive used ripjaw ram in the past and its a good product, so I decided to purchase this ram as it is, Jedec compliant Duel rank Does run at advertised speed of 3200mhz. So far no problems, if wondering my system is as follows. Intel Core i7-10700, 8 core, socket fclga1200 Samsung 990pro 1tb Samsung 850evo, backup drive 512gb 3 monitors running off of integrated graphics. And this ram. The product runs in my system flawlessly and is very quick. I contacted their customer support to make sure that this ram will infact run at advertised speed. The responce to my email was very quick, same day, I will be purchasing more of this ram. I have 2 more of these computers. Same motherboard, processor, ect. So in summary great product and customer support.

Great value! $189.99 for 128GB of RAM for my Proxmox VE server. Been running for 2 years across 4 VMs. Looks fine, easy to install, wished it had a shroud, but I'm sure heat dissipation is fine. Since it's covered up, don't really care about RGB, not overclocking, no lighting.

These fit with perfect compatibility into my two 2025 HP Pavilion desktops to increase their memory capacity.

I had this brand for a ddr3 machine and it was really good stuff. So I bought this brand again for a new ddr4 build. These are the dreaded hynix modules. No complaint here and they are working great. They clocked as 2400 speed until I enabled DOCP. Then they lay down a 3200 speed with cas 16 and low number there after. That is what the sale information said and that is what they do according to cpuid software. Booting fine. Tolerates me playing with the speeds and timing. Seems to work best on the docp profile for me. So minor update. This is a new machine and after updating all the software including the bios and chipset the ram has become set on running docp or less. Probably a change in the amd chipset drivers but I don't know that for sure. Still, docp is running at the timings in the sales despription. For the most part those are very excellent settings. System response or "snappyness" is excellent. I am delighted to have excellent product at a good price. I hope others enjoy the same success. On my system I found a lower clock speed and lower latency allowed faster single core benchmarks with this memory in a dual channel config.

Firstly, this is a great pair of DDR4 DIMMs. 3,200 MHz with CAS latency of 16 at this price is great! My only complaint is that when I activated the XMP profile, it moved the voltage to 1.35 (as stated in the product title), but that voltage was way too high for this RAM and I was getting RAM-related BSODs. But as soon as I dropped the voltage on it, it worked out well. I will continue using this in the future. Will buy more if I need. I'll just have to remember to drop the voltage. If you don't feel comfortable adjusting the voltage on your RAM. Then just set the speed to 3200 and the CAS to 16-18-18-38-56 and leave the voltage on auto. Feel free to comment on this to correct me or to ask for clarification.

Before you spend money on RAM, go to the maker of your motherboard and look at their QVL information. (The QVL lists all the specific ram that was used to test the motherboard. It is the ram that is guaranteed to work with the motherboard, because it was tested by the motherboard manufacturer and it worked.) I missed that step, and found out the expensive painful lesson that four sticks of RAM may not be supported at the frequency listed on the RAM module. My motherboard has a 4 x DIMM, Max. 128GB, DDR4 4400(O.C) capacity so I felt safe going with 3200 MHz as it was the recommended speed for my processor. I bought two sticks of (8 GB) for a total of 16 GB, and it ran perfectly at 3200 MHz. A few weeks later, I bought a second set of identical RAM (Same manufacturer, date code, frequency, capacity, and CAS latency) to double my RAM to 32 GB. When I put the second set in to fully populate all four slots with (8 GB) each, The computer refused to boot and forced me to downgrade the 3200 MHz listed RAM to a maximum of 2400 MHz. After much searching, I was directed to the QVL information for my motherboard. When I reviewed the information, the fastest RAM speed my motherboard would support with all slots filled was 2800 MHz. As it turned out, most of those were too expensive for my budget. I've past the return window for the first set and the window for the second set is just days away. So now I sit thinking about the following: Do I run only two (8 GB) sticks at the higher frequency of (3200 MHz)? Do I lower the frequency to (2400 MHz) to run all four (8 GB) sticks? Do I scrap all four (8 GB) sticks and buy two (16 GB) sticks at (3200 MHz)? Don't make my mistake, buy the higher capacity up front and save yourself headaches down the line if you plan to run high speed RAM or want to overclock it. ------------------------------------- UPDATE ------------------------------------- I took the time to contact the manufacturer of the ram, and to my surprise after talking through the whole QVL debacle they extended me a one time courtesy of sending me 2 sticks of 16 GB DDR4 3200MHz PC4-25600 CL16 ram. They sent it to me via USPS and allowed me to test the new memory before deciding which ram to send back. The whole process from first contact to my returning the old ram took about 10 days, but during that time the only down time I had on my system was the 5 minutes it took to swap out the 4x8 and replace it with the 2x16. I couldn't be happier with the customer service department of the ram manufacturer. The two sticks of 16 GB ram are running at 3200 MHz with the following timings of 16,18,18,18,38,73. Again, I can't stress this enough. CHECK THE QVL INFO ON YOUR MOTHERBOARD. It will save you countless headaches post build.

After using the DDR4 3200 2x 16GB kit got almost half a year now, I have to say I am very happy with the product. While the bare ram made it look inferior to those “high performance” ram kit which generally comes with some creative looking heat spread, this no frills ram kit don’t perform any worst. In fact, it is so hard to find ram kits that tells you clearly if it’s single or dual ranked, and also the latency timings. So I appreciate the transparency here. Highly recommended due to stability and price.

商品の説明に書かれている通り、1.35V動作でDDR4-3200です。 定格だとDDR4-2400なので注意してください。 因みに、シングルランク品です。 4年間使っていますが、動作は安定していて満足しています。

Arrivé dans les tps. Parfait

très difficile de faire reconnaitre et fonctionner ces ram sur une ASUS MAXIMUS VIII hero couplé a un I7 7700 Impossible d'activer le profil XMP et même avec le voltage préconisé par le vendeur de 1.35 volt ça ne passe pas avec le profil ddr4 3200 de la carte mère après plusieurs essais de réglage sa semble fonctionné, CPUID donne comme marque de puce SAMSUNG Le support est réactif et me donne comme info les réglages pour l'instant constat mitigé, la carte mère est aussi un peut compliquée, encore en train de tester

ヒートシンク付きのモノからヒートシンクのみを外すことを試みたもののうまくいかず、こちらを購入しました。 最近はこんなに安くいい物が手に入るのですね。 ヒートシンク後付け勢にはオススメです。