Cookology 35cm Island Cylinder Cooker Hood & Kitchen Extractor Fan Carbon Filters (Stainless Steel)

Installation:

This Hood gets attached to your ceiling, by fixing a steel plate to a joist from which the hood will hang.

Angled bars are then attached to the hood itself at the desired height and inside both chimney sections.

After you have connected the plug and ducting (if venting outside) you simply bolt the angled bars to the ceiling plate.

Finally you slide the top chimney section up to the ceiling plate thereby covering the fixtures.

Minimum Height:

Without modification the minimum height is 990mm

You can achieve a minimum height of 750mm by cutting the bottom of the top chimney section.

However, any cut items cannot be returned

Island Hood features:

UK 13amp Plug

192W Motor

Push button control operation

3 speeds

1 washable stainless steel & aluminium grease filter

2 x 1W LED light strips

Powerful Extraction capacity: 750 m3/hr

Type of extraction:

Extraction outside possible with 150mm ducting kit like the DK1M150 (not included)

Recirculation back into kitchen possible with CCF200 filters (included)

Technical details:

Minimum distance from hob: 700 mm

Minimum distance from electric hob: 650 mm

Maximum extraction power: 750 m³/h

Number of speeds: 3

Type: Island

Filtering: Grease filter

Number of filters: 1 pcs

Weight & dimensions:

Width: 350mm

Depth: 350mm

Height: Please see the technical diagram for more details under images

Performance:

Energy rating: C

Motor power: 64.4 kWh/annum

Air flow rating: C

Light efficiency: A

Grease filter efficiency: C

Noise: 72dB

• This cylinder style Cooker hood is suitable for medium to tall ceilings (please check the technical drawing under images) and extends up to your ceiling over an island in your kitchen. LED spot lights and modern push button controls make for a fantastic centre piece that wouldn't look out of place in an upmarket designer kitchen..
• Looks aside, this island hood features a powerful extraction rate of 750m3/hour, more than enough to easily keep a large kitchen free of smoke and smells..
• It has been developed by Cookology so you can either vent outside using a ducting kit such as the DK1M150 (not included) or if you don't have this option, you can use CCF200 carbon filters (included) to help get rid of smells before allowing the air back into your kitchen through the vents in the chimney..
• You get a choice of 3 speeds so you can adjust the power and noise depending on what you're cooking and the LED spot lights add visibility to your kitchen..
• The stainless steel & aluminium grease filter is washable and will absorb ty, greasy residues in the air, helping to prevent sticky grime deposits building up on your appliances and units..